Contents Menu Expand Light mode Dark mode Auto light/dark, in light mode Auto light/dark, in dark mode Skip to content
Hardware documentation
Light Logo Dark Logo

Hardware

  • Gateways
    • Edge IoT Gateway (XS) User Guide
      • 1. Quick Start
    • Edge IoT Gateway (S) User Guide
      • 1. Flashing Debian
    • Edge IoT Gateway (M) User Guide
      • 1. Quick Start
      • 2. Hardware Features
        • 2.1. Specifications
        • 2.2. Interfaces
        • 2.3. Antenna Configuration
        • 2.4. Industrial I/O (Example of a subsection within Industrial I/O)
        • 2.5. Cellular Frequencies
    • Edge IoT Gateway (L) User Guide
      • 1. Quick Start
      • 2. Hardware Features
        • 2.1. Specifications
        • 2.2. Interfaces
        • 2.3. Cellular Frequencies
    • Gateway Components: Connectivity Cards
      • CTHINGS.CO LTE+Wirepas2.4 (LTE / HSPA+ / EGRPS) subsystem
      • Quectel BG95-Mx (LTE Cat. M1 / Cat. NB1 / Cat. NB2 / EGPRS) subsystem
      • Quectel EC25-xx (LTE / HSPA+ / EGRPS) subsystem
      • Quectel EG25-G (LTE / HSPA+ / EGRPS) subsystem
      • Sierra Wireless EM7411 (LTE / HSPA+) subsystem
      • Sierra Wireless EM7421 (LTE / HSPA+) subsystem
      • Telit Cinterion FN990AXX (5G NR / LTE / HSPA+) subsystem
  • Routers
  • Bridges
  • Connectivity Cards
    • Regulatory
  • Linux OS
    • Debian Linux
    • Connecting over serial console
    • Connecting using a monitor/keyboard
    • Connecting over SSH
    • Flashing a new image
    • Working with Industrial I/O
      • CAN Bus
      • RS-232
      • RS-485
    • Extracting a “golden” image from the current state of the OS
    • Networking
      • Setting up an Ethernet Connection
      • Setting up a Cellular Connection
      • Setting up a Wi-Fi Connection
      • Upgrading Quectel Cellular Modem Firmware
      • Ethernet Tethering
      • Wi-Fi Tethering
  • Working with Wirepas (2.4 GHz)

Resources

  • Orchestra Overview Brochure
  • Quick Facts Sheet
  • CTHINGS.CO Website
  • Support
Back to top
View this page

Edge IoT Gateway (S) User Guide¶

  • 1. Flashing Debian
    • 1.1. Goals
    • 1.2. Prerequisites
    • 1.3. Steps
      • 1.3.1. Flashing the microSD card
      • 1.3.2. Configuring the device to boot from microSD
      • 1.3.3. Configuring the microSD card for eMMC flashing
      • 1.3.4. Flashing eMMC
Next
1. Flashing Debian
Previous
1. Quick Start
Copyright © 2025, CTHINGS.CO®
Made with Furo